请教数播对音质有多大提升？ - 耳机网-耳机大家坛

HQPlayer Setup

User Guide > Audio > HQPlayer

Roon can stream directly to HQPlayer, whether both applications are running on the same machine or if they're on different machines on your network.

Note: HQPlayer 3.12.0 or higher is required.

Setting Up Roon And HQPlayer

To setup Roon to output to HQPlayer follow these steps:

Step 1: In order to connect to HQPlayer using any address other than localhost or 127.0.0.1, you must enable the "Allow control from network" feature in HQPlayer. This is the globe icon on the far right hand side of the HQPlayer toolbar:

MacWindows

Step 2: In Roon, go to Settings/Setup/HQPlayer and click "Add HQPlayer".

Step 3: Enter the network address where HQPlayer is running:

If HQPlayer is running on the same computer as your Roon Core, leave the default localhost value, then press Add
If HQPlayer is running on your network but on a different computer, enter the local IP address of that computer, then press Add.

Note: You can find out your IP address by following the instructions here -- just make sure to use your local IP address, as opposed to your external/public IP address. The local address will most commonly look like 10.x.x.x, or 192.168.x.x.

Finally, choose HQPlayer from your Zones menu

Notes for Roon/HQPlayer

When controlling HQPlayer from Roon, use the transport controls within Roon. If Roon detects that you've manipulated transport controls from HQPlayer, it will stop the music and release control of HQPlayer.

HQPlayer has multiple options of displaying the play time, “time”, “remain” and “total remain”. You will want to select the first option of "time" in HQPlayer for the playback bar to properly progress in Roon.

An HQPlayer instance can only be controlled by one external piece of software at a time. This is an HQPlayer limitation. If you attempt to initiate control from another piece of software, Roon will lose control of HQPlayer.

HQPlayer filter settings can be adjusted from within HQPlayer. This works best if you first press the "stop" button in HQPlayer, then make the adjustments you want, then proceed in using Roon.

If you're using a device in HQPlayer, make sure that the device is disabled in Roon's audio settings. Both Roon and HQPlayer expect to have exclusive access to the device, and they might conflict if you configure both at the same time.

[size=0.7em]Page last changed Wed Apr 10 2019