SABRE DA8功能特点:
●THD+N小于0.0002%,动态133dB,闲置噪声1.5uV
●USB支持32bit,384KHZ PCM信号
●DSD直接解码
●5种滤波器模式可选,
●相位可正负可调
●消除抖动控制开关
●滤波器,相位, 抖动控制开关,可以组合调整出不同风格的声音.
●高精度DPLL锁定带宽自动设置
●80级可调音量
●平衡/不平衡前级输出
●平衡前级输出带驱动器,可以作为平衡耳机放大器使用
●可关闭耳机放大器,关闭前级输出,作为纯解码器使用
●甲类单端耳机放大器.
●耳放输出短路保护,开机,切换操作延时保护。
●TFT液晶显示器,操作方便.5秒无操作时亮度降低80%
●操作设置自动记忆.
●厚铝合金机箱,纯铝按键,旋扭,避震机脚
●100V-240V全球通用电压范围
钰龙韵凭借着对ESS9018多年来的调试经验,并使用音频分析仪,频谱仪等仪器辅助分析信号完整性,电磁兼容性,音频性能指标。配合软件控制,研发出操作灵活,功能丰富实用的高性能解码器SABRE DA8
我们更注重SABRE DA8的音色调整,调音工作是由钰龙韵的调音团队(由众多资深音响音乐爱好者组成)的协作下经过充分严谨的调校完成。它的声音既有大动态爆发力 ,又有精致柔润的解析力,中低频饱满大气,中高频细腻柔美,整体均衡自然,能完美的演绎各种不同类型的音乐!
DA8使用ESS9018为解码芯片, AD797*5电压基准和低通滤波, OPA1632*2缓冲兼前级放大输出,耳机放大采用钻石缓冲电路,ON音频中功率对管输出.并具有短路保护电路,加拿大plitron高品质变压器供电 ,LT1129/LT3021搭配wima薄膜电容组成的纯净的电源供给ESS9018,模拟电路供电使用了松下FC高频低阻VISHAY BC046,WIMA MKS2,NPO等电容搭配调整至优异的性能和自然的听感.
USB输入使用和意大利Amanero合作开发的定制版Combo384,支持DSD和PCM 32Bit,384KHZ,支持Mac OSX Linux, windows操作系统,有良好系统兼容性.
功能的操作使用软件控制 , 2.4寸彩色液晶显示屏显示工作状态,5秒无操作时亮度降低80%,自动记忆用户设置, 简单易用的操作. 5种滤波器模式和正负相位可调能组合出各种不同风格的声音., 80级可调音量前级输出可以方便的连接专业有源音箱,纯解码模式下外接功放效果更好,它饶开音量控制,关闭耳机放大供电,完全工作在纯解码状态.
多级的数字信号整型缓冲电路,能充分优化数字信号质量,使用低相位噪声高精度晶振做为主时钟, DPLL锁定带宽自动设置, 抖动消除器可以开关控制,让它既可以锁定劣质的音频信号优化后解码,也可以让高质量的信号直通输入得到更好的声音.
外壳采用铝合金模具拉伸成型,加厚的材料,小体积的设计:(250*190*60mm)精细的表面处理工艺。(本机体积和钰龙韵SABRED系列产品搭配兼容,例如SABRE A18耳放和SABRE A10功放).精致的纯铝音量旋扭,操作按键,避震机脚,使用起来拥有更流畅的手感.
技术指标:
USB输入格式支持: PCM 16-32bit 44.1Khz 48Khz 88.2Khz 96Khz 176.4Khz 192Khz 352.8Khz 384Khz DSD64,DSD128 - On Windows DSD256,DSD512
USB输入操作系统支持Mac OSX Linux with UAC2 compliant kernel.
KS/Wasapi/WDM/ASIO Drivers for MS OS XP to Win8 32-64bit
同轴,光纤,AES输入:16-24Bit,44.1-192KHZ
信噪比: -135dB.
动态范围: 133dB.
失真度: <0.0002% (实测,实际性能高于实测指标)
频率响应: 20-30KHz-0.2dB
左右声道串音-135dB
平衡输出电平:4.2V
单端耳放输出功率: 600欧:70mw 300欧:150mw 150R:280mw 32R:1W
功耗: <30W.
尺寸: 250*200*60mm.
重量: 2.68Kg
Specification
●THD+N less than 0.0002%, dynamic 130dB, Idle noise 1.5uV
●USB supports 32bit, 384KHz PCMsignal,DSD support
●Invertible phase
●5 different filter mode
●Jitter eliminator switch
●Filter, phase, jitter control switch. Different style of sound under different combination
●High precision bandwidth-auto-set DPLL
●80 steps volume control
●Single/Balanced pre-amplifier output
●Balanced pre-amplifier output with driver, can be used as balanced headphone amplifier
●Work as pure DAC when headphone amplifier and pre-amplifier circuit turned off
●Class A single end headphone amplifier
●TFT LEDdisplay. Easy operate. 80%dimafter 5 seconds
●Auto-save configuration
●Thickened aluminumcase. Aluminum button, volume knob and feet
●100v-240v global voltage range
Yulong has many years of experience in ESS9018 design By using audio analyzer and spectrum analyzer for signal
integrity, electromagnetic compatibility and audio performance tests, in combination of newly designed controlling software,
Yulong developed flexible operating, fully functional high performance DAC - SABRE DA8.
The main focus is on adjusting timbre of SABRE DA8. The process of tuning was completed by Yulong's acoustic team
(Based on few experienced audiophiles). The DA8 not only provide large dynamic, but also delicate details. The mid-low is full
and majestic, whereas the mid-high is soft and delicate. Overall, its natural and balanced sound is suitable for various style of
music.
DA8 includes ESS9018 as DAC chip, AD797*5 for voltage reference and low pass filter. OPA1632*2 for buffer and
preamplifier output. Headphone amplifier is base on diamond buffer circuit. ON audio transistor pair output. Also DA8 includes
short circuit protection. The Canadian Plitron high quality transformer, LT1129/LT3021 and WIMA capacitor provide pure power
supply for ESS9018. For analog circuit power supply, Panasonic FC VISHAY BC046 WIMA MKS2 NPO capacitors were
selected to provide outstanding performance and natural listening experience.
USB input uses customized Combo384 chip which co-designed by Italian Amanero and Yulong. It supports DSD and PCM
for formats up to 32Bit/384KHz under Mac OS X, Linux and Windows.
All functions are controlled by software operating system. 2.4 inch color LED display shows the status. Dimming is enabled
after 5 seconds with no operation. The unit automatic saves user settings. User friendly interface provides control for 5 different
filter mode and inverse phase to produce different styles. 80 steps volume adjustment for pre amplifier output to connect to
powered speakers. Under pure DAC mode direct connect to power amplifier provides even better quality sounds. It bypasses
the volume control circuit and turns off the power supply to headphone amplifier to work as a pure DAC.
Multi-stage digital buffer and shaping circuit can optimize the quality of digital signal. Low phase-noise high-precision crystal
oscillator as master clock, bandwidth-auto-set DPLL, switchable jitter eliminator are used to lock and optimized bad signal
before decoding. Signals of high quality can be by-passed to obtain better performance.
Stretch forming aluminum case, thicken material, small size design (250*200*60mm) detailed surface processing. (Size
matches Yulong SABRED series products, e.g. SABREA18 headphone amplifier and SABRE A10 amplifier). Refined aluminum
volume knob, push button and shock absorber feet give smoother fee.
Technical Specifications :
USB Input format support: PCM 16-32bit 44.1Khz 48Khz 88.2Khz 96Khz 176.4Khz 192Khz 352.8Khz 384Khz 。DSD64,DSD128 - On Windows DSD256,DSD512
Operating system support Mac OSX Linux with UAC2 compliant kernel.KS/Wasapi/WDM/ASIO Drivers for MS OS XP to Win8 32-64bit 。
Inputs: Optical, Coaxial, AES/EBU:16-24Bit,44.1-192KHZ。
SNR: -135dB
Dynamic Range: >130dB
THD+N: 0.0002%
Frequency Response: 20-30KHz-0.2dB
Crosstalk -135dB
balancedOutput level:4.2V
Headphone amplifier output power: 600Ω:70mw 300Ω:150mw 150Ω:280mw 32Ω:1W
Power consumption: <30W
size: 250*200*60mm
weight: 2.68Kg
正面:
正面图:DSD
正面关闭耳放
背面
内部图
黑色图片
技术方框图:
线性度
-60dBFFT
-3dB FFT
THD+N
|