找回密码
 -注册-
查看: 8311|回复: 3

德国MEIER AUDIO CORDA XXS耳放

[复制链接]
发表于 2010-7-12 10:20 | 显示全部楼层 |阅读模式 来自 广东省深圳市
CORDA XXS


From the energy of two small batteries a portable CD- or MP3-player nowadays feeds us with over 30 hrs of music. However, the use of a supply voltage of just 3V has its price as far as sound quality is concerned. Many headphones require quite a high signal to obtain reasonable sound levels. The supply voltage of 3V of modern portables simply doesn't provide enough "juice" to drive these headphones properly and sound quality is rather poor.

The CORDA XXS is a portable headphone amplifier meant to "replace" the standard headphone socket of your player. It has an internal supply voltage of 9V and thus much better driving capacities. Connecting this amp to you portable will simply make your headphone sound better.

Volume control and sockets can be found on the front of the amp so it can be used while being carried in a pocket or a small bag.

The knob to set the volume is relatively small and will not rotate easily while accidently being touched by clothes or arm.

The metal enclosure of the MOVE is very sturdy and to absorb any excess pressure on the connectors these are placed slightly recessed in the front plate.

The circuitry inside needs very little current and the amplifier runs for upto approximately 100 hrs on a single 9V battery. To prevent unintended current drain the amp has a LED-powerindicator.

To save batteries and to increase sound quality at home an external powersupply can be connected with a supply voltage up to 12V DC.

Technical details
Measures: 8.8 x 4.7 x 2.2 cm

Weight without battery: 85 gr.

Supply voltage: 6 .. (9) .. 12 Volts DC

Mean current uptake: 7 mA

Maximal amplification: 4 / 18 dB (internal switch)

Input impedance: 13 kOhm

Output impedance: < 1 Ohm

The unit runs from a single 9V battery and internally the supply voltage is splitted to create a pair of +4.5 and -4.5V powerlines.

Alternatively external powersupplies can be connected with supply voltages between 6V and 12V DC. The external supply voltage is internally splitted to create a pair of +3..+6V and -3..-6V powerlines.

External noise is removed by RC-filtering of the supply voltage.

The total buffer capacity is 4000 uF to lower the effective battery impedance.

For amplification two single AD8610 opamps are used for maximal sonic performance.(No dual or quad-opamps!)

The high quality potentiometer is custom-made by ALPS and has a built-in ON/OFF switch.

Inside the signal path only metal-resistors and high-quality film-capacitors are used (polypropylene).

The enclosure is made entirely of aluminium.

Accessories:
     2 mini-mini interconnects (goldplated)
     tool to open the amp
xxsfrontbattery480.jpg
 楼主| 发表于 2010-8-6 10:00 | 显示全部楼层 来自 广东省深圳市
[s:5]
回复

使用道具 举报

发表于 2011-1-14 13:00 | 显示全部楼层 来自 福建省福州市
no ren kan de dong
[s:8] [s:12] [s:50]
回复

使用道具 举报

发表于 2011-1-14 18:33 | 显示全部楼层 来自 四川省成都市
wo shi lu guo de ...
回复

使用道具 举报

您需要登录后才可以回帖 登录 | -注册-

本版积分规则

Archiver|手机版|粤icp备09046054号|耳机网-耳机大家坛

粤公网安备 44030602000598号 耳机大家坛、www.erji.net、网站LOGO图形均为注册商标

GMT+8, 2024-3-19 11:42

Powered by Discuz! X3.2

© 2001-2013 Comsenz Inc.

快速回复 返回顶部 返回列表